Our COMBIped® brace can be used as a remedy against deformed, ingrown and rolled-in nails that cause pain. The brace will help to use a wire brace, even if one side of the nail edge is accessible only.
Depending on the type of application, the brace can be fixed to apply tension on either both sides of the nail or one side only.
If you need to apply tension on both sides, the brace should be as long as possible and should stretch accross the entire width of the nail. You may also set two COMBIped braces one after the other (also with different wire sizes).
- If the effect is required on one side only, the brace will be made shorter and the adhesive pad affixed in the middle. The effect will then be focused on the wire side.
- In order to cure a heavily rolled-in nail, the COMBIped® brace should be inserted as far to the rear as possible.
- In an acute pain scenario, please place the COMBIped® brace approx. 2 mm behind the pain area.
COMBIped® Starterbox inclueds:
6pcs COMBIped® soft
3pcs COMBIped® medium
3pcs COMBIped® hard
3TO® Combi Bending Tool
Active Glue 7ml
6210; 2125; 2130; 7300; 6290; 4300
! Please don't forget about the PediGel Kit !